Installation on page 13 for more information. ?
again after a few seconds. ?
the operation is finished. ?
? File open error : The open file operation failed. ?
? Out of Memory : The memory overflows. ?
applicable for production mode. ?
? Cancel production mode : Cancel the production mode. ?
? Too long file name : The file name is too long. ?
Status bar. ?
? Can ? t cancel! : The Cancel operation has failed. ?
Insert a chip. ?
The pin number refers to DIP chip’s pin number or the adapter’s pin number. ?
ceased.
? Programmer not found : The programmer is not connected to the PC or it
is connected improperly. Check the connection. Refer to Chapter 2 System
?
? Programmer not ready : Turn off the programmer power switch and turn it on
?
? Programmer is running : The programmer hardware is operating. Wait until
?
?
?
? Production mode isn ? t available for this chip : Since the production mode is
dependent on the pin check, the chips without pin check function are not
?
?
?
? User cancel : The system displays this message after you select Cancel on the
?
?
? Not a project file : The file selected is not a project file. After the software is
updated, the software may not be able to identify a previously created file. You
will need to create the file again. ?
Insertion Test Errors
The following error messages may occur during the Insertion Test.
? No device in the socket. : The system did not detect a device in the socket.
?
? Find non ‐ connection or poor pin contact : The system detected poor pin
contact. Check the pin contact. If you find nothing wrong with the connection
of the noted pin(s) replace the chip with another in case the first chip is broken. ?
?
?
? Device inserted backwards or damaged. : Take the chip out, reverse it,
and insert it again properly. If the problem still exists, the chip may have
been damaged. ?
Superpro ? 5000 User’s Guide
86
相关PDF资料
CYCLONEMAX CYCLONE MAX FLASH PROGRAM
D-1723-WH DRAWER SLIDING 16.56X6.31X19.18"
D072-0103 DEV KIT 7 NIMBLE SBC/FUSION7/BB
D10B2 SURGE SUPPR NETWORK BNC
D1U-12-CONC 12V D1U OUTPUT CONNECTOR CARD
D1U-48-CONC 48V D1U OUTPUT CONNECTOR CARD
D1U-52-CONC 52V D1U OUTPUT CONNECTOR CARD
D1U3CS-D-850-12-HC4C DC/DC FRNT END 850W 12V 3.3V AUX
相关代理商/技术参数
CX100A6 制造商:DANAHER SPECIALTY PRODUCTS 功能描述:TIMER, EAGLE SIGNAL, ELECTRONIC REPEAT CYCLE, LCD, 120V, CYCL-FLEX PANEL MT 制造商:Veeder-Root Company 功能描述:ELECTRONIC CYCLE TIMER 制造商:VEEDER ROOT 功能描述:ELECTRONIC CYCLE TIMER; Supply Voltage Range:120V AC; Time Min:0.01s; Time Max:199.9h; Reset Time:30ms; No. of Digits / Alpha:4-1/2; Supply Current:10A; Supply Voltage AC Max:120V; Time Range:0.01sec to 199hr 59min
CX100B6 制造商:Veeder-Root Company 功能描述:
CX100DB BLACK 100M 制造商:IMAGE 功能描述:CABLE COAX CX100DB BLACK 100M
CX100DB BLACK 250M 制造商:IMAGE 功能描述:CABLE COAX CX100DB BLACK 250M
CX-100H 制造商:Taiyo Electric Ind. 功能描述:
CX-100NUT 制造商:Taiyo Electric Ind. 功能描述:
CX-100RT-2C 制造商:Taiyo Electric Ind. 功能描述:
CX-100RT-3C 制造商:Taiyo Electric Ind. 功能描述: